{"id":451,"date":"2011-08-27T23:07:23","date_gmt":"2011-08-28T03:07:23","guid":{"rendered":"http:\/\/you-can-fix-it.com\/fix\/?p=451"},"modified":"2011-09-04T12:19:46","modified_gmt":"2011-09-04T16:19:46","slug":"kitchen-or-bathroom-fix-a-single-handle-delta-peerless-faucet","status":"publish","type":"post","link":"http:\/\/www.you-can-fix-it.com\/fix\/plumbing-2\/kitchen-or-bathroom-fix-a-single-handle-delta-peerless-faucet\/","title":{"rendered":"Faucet: Fix a Single Handle Delta-Peerless Faucet"},"content":{"rendered":"

If your Delta or Peerless brand single handle faucet is dripping, a little time and a Delta\/Peerless single-handle faucet repair kit<\/a>\"\" will solve your problem lickety split.


\n
\nStep 1: Turn the water supply off to the faucet using the shut off valves below the sink. Turn on the faucet to drain any water left behind.


\n
\nStep 2: Use an allen wrench to loosen the set screw on the underside of the faucet handle. Lift the handle up and off the faucet.


\n
\nStep 3: Use a locking wrench to remove the dome shaped cap assembly beneath the faucet handle. Wrap the wrench jaws with duct tape to prevent scratching.


\n
\nStep 4: Pull up on the ball stem to remove the cam assembly and ball.


\n
\nStep 5: Remove the spout by pulling it up and off the faucet.


\n
\n<\/a>\"\"<\/p>\n

Step 6: Replace the two o-rings found beneath the spout with new o-rings from the repair kit<\/a>\"\".


\n
\nStep 7: Use a towel to soak up any excess water in the faucet body. You will see two black circles inside the body. These are rubber seats. Use a flat screw driver or dental pick to remove the seats and springs below them.


\n
\nStep 8: Replace the seats and springs with new ones from the repair kit<\/a>\"\". If you have trouble getting them in place, slide a rubber seat onto the screw driver shaft, followed by a spring. Place the screw driver into the empty hole and let the spring and seat slide down the shaft. Slip the screw driver out and carefully press the seat and spring into the hole. Make sure both seats are level before proceeding.


\n
\nStep 9: Examine the old ball and cam assembly for any wear spots or cracks. If either is worn in the slightest bit, replace it with the new part from the kit.


\n
\nStep 10: Place the ball back into the faucet, sliding the slot in the side of the ball over the pin inside the faucet body.


\n
\nStep 11: Replace the spout, followed by the cam assembly and the cap assembly.


\n
\nStep 12: Test to be sure the ball moves freely in the faucet body. If it seems too loose or too tight move the plastic ring at the top of the cap by pushing a flat screwdriver against one of its notches. Turn the ring clockwise to restrict the ball movement and turn it counter clockwise to loosen it.


\n
\nStep 13: Replace the handle, tighten its set screw and turn the water back on.
\n


\n
\nRepair kits for Delta\/Peerless single handle faucets<\/a>\"\" are readily available at your local hardware store or home center.


\n<\/p>\n

Email us at info@you-can-fix-it.com<\/a> to request new fix-it ideas. We also encourage you to add comments or suggestions below each article.<\/font>\n<\/p>\n\n\n\n
You-Can-Fix-It.com<\/p>\n

\"tools\"<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Email us at info@you-can-fix-it.com<\/a> to request new fix-it ideas. We also encourage you to add comments or suggestions below each article.<\/font><\/p>\n","protected":false},"excerpt":{"rendered":"

If your Delta or Peerless brand single handle faucet is dripping, a little time and a Delta\/Peerless single-handle faucet repair kit will solve your problem […]<\/a><\/p>\n<\/div>","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[213],"tags":[209,208,211,212,16,207,210,206,205],"class_list":["post-451","post","type-post","status-publish","format-standard","hentry","category-plumbing-2","tag-delta","tag-delta-peerless","tag-delta-peerless-faucet","tag-dripping-water","tag-faucet","tag-handle","tag-peerless","tag-single","tag-single-handle"],"_links":{"self":[{"href":"http:\/\/www.you-can-fix-it.com\/fix\/wp-json\/wp\/v2\/posts\/451","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.you-can-fix-it.com\/fix\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.you-can-fix-it.com\/fix\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.you-can-fix-it.com\/fix\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"http:\/\/www.you-can-fix-it.com\/fix\/wp-json\/wp\/v2\/comments?post=451"}],"version-history":[{"count":6,"href":"http:\/\/www.you-can-fix-it.com\/fix\/wp-json\/wp\/v2\/posts\/451\/revisions"}],"predecessor-version":[{"id":454,"href":"http:\/\/www.you-can-fix-it.com\/fix\/wp-json\/wp\/v2\/posts\/451\/revisions\/454"}],"wp:attachment":[{"href":"http:\/\/www.you-can-fix-it.com\/fix\/wp-json\/wp\/v2\/media?parent=451"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.you-can-fix-it.com\/fix\/wp-json\/wp\/v2\/categories?post=451"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.you-can-fix-it.com\/fix\/wp-json\/wp\/v2\/tags?post=451"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}